Open Access Peer-reviewed Research Article

Main Article Content

Denis Rodrigue corresponding author


To improve on the mechanical properties of polymers in general, the concept of hybrid composites was developed by using two or more different reinforcements in the same matrix, or by using two or more different sizes of the same reinforcement (auto-hybrid composites). In this case, most of the literature results showed that the resulting elastic modulus can be well approximated by the simple rule of mixture (linear additive law) from the tensile modulus of each reinforcement used alone. But is some cases, a positive deviation from this linear approximation was reported up to a point where an optimum composition can give a modulus above the value of both reinforcements used separately. In this work, a simple model is presented to show that positive deviations are possible and the optimum reinforcement ratio is around 25/75 in terms of the lowest/highest reinforcing particle. The model is also compared with literature data where good qualitative agreements are obtained as a first approximation.

elastic modulus, hybrid polymer composites, optimum composition

Article Details

Supporting Agencies
Funding for this work was received from the government of the Hunan province (China).
How to Cite
Rodrigue, D. (2019). Elastic modulus prediction for hybrid polymer composites. Materials Engineering Research, 1(2), 64-68.


  1. Rodriguez-CastellanosWand Rodrigue D. Auto-hybridization of polyethylene/maple composites: the effect of fiber size and concentration. Polymers and Polymer Composites, 2017, 25(6): 471-482.
  2. Yousefian H, Ben Azouz K and Rodrigue D. New Multi- Scale Hybrid System Based on Maple Wood Flour and Nano Crystalline Cellulose: Morphological, Mechanical and Physical Study. Journal of Polymers and the Environment, 2016, 24(1): 48-55.
  3. Rodriguez-Castellanos W and Rodrigue D. Production and Characterization of Hybrid Polymer Composites Based on Natural Fibers. Composites from Renewable and Sustainable Materials, 2016: 273.
  4. Yousefian H and Rodrigue D. Hybrid composite foams based on nanoclays and natural fibres. Nanoclay Reinforced Polymer Composites: Natural fibre/Nanoclay Hybrid Composites, Mohammad Jawaid, Abou el kacem Qaiss, Rachid Bouhfid Eds., Springer, Singapore, 2016: 51-79.
  5. Saw SK and Datta C. Thermomechanical properties of jute/bagasse hybrid fibre reinforced epoxy thermoset composites. BioResources, 2009, 4(4): 1455-1476.
  6. Perez-Fonseca AA, Arellano MR, Rodrigue D, et al. Effect of coupling agent content and water absorption on the mechanical properties of coir-agave fibers reinforced polyethylene hybrid composites. Polymer Composites, 2016, 37(10): 3015-3024.
  7. Ramezani Kakroodi A, Leduc S and Rodrigue D. Effect of Hybridization and Compatibilization on the Mechanical Properties of Recycled Polypropylene-Hemp Fiber Composites. Journal of Applied Polymer Science, 2012, 124(3): 2494-2500.
  8. P´erez-Fonseca AA, Robledo-Ortz JR, Moscoso-S´anchez FJ, et al. Injection molded self-hybrid composites based on polypropylene and natural fibers. Polymer Composites, 2014, 35(9): 1798-1806.
  9. Kalaprasad G, Joseph K, Thomas S, et al. Theoretical modelling of tensile properties of short sisal fibre-reinforced low-density polyethylene composites. Journal of Material Science, 1997, 32(16): 4261-4267.
  10. Pedrazzoli D and Pegoretti A. Hybridization of short glass fiber polypropylene composites with nanosilica and graphite nanoplatelets. Journal of Reinforced Plastics and Composites, 2014, 33(18): 1682-1695.