Open Access Peer-reviewed Review

A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites

Article Sidebar

Mechanical properties of some natural and synthetic fibers
Download PDF
Submitted   Jun 18, 2019
Published   Jul 17, 2019
Issue    Vol 1 No 2 (2019)
DOI   10.25082/MER.2019.02.007

Views

7992

Downloads

3504

Citations

PlumX Metrics

Main Article Content

Fatin I. Mahir
Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh; National Institute of Textile Engineering and Research, Nayarhat, Savar, Dhaka 1350, Bangladesh
Kamrun N. Keya corresponding author
1 Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh
Bijoyee Sarker
Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh; National Institute of Textile Engineering and Research, Nayarhat, Savar, Dhaka 1350, Bangladesh
Khandakar M. Nahiun
Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh; National Institute of Textile Engineering and Research, Nayarhat, Savar, Dhaka 1350, Bangladesh
Ruhul A. Khan
Institute of Radiation and Polymer Technology, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh

Abstract

The use of composites in different sectors has become inevitable due to the enhancement in properties, reduction in the manufacturing cost and suitability to several applications. Among different classifications, polymeric composites are mainly focused on their use as structural components and the selection and composition of reinforcement play a vital role in determining the characteristics of the composite. Although composites are developed with man-made reinforcement in the beginning stage, in the present situation, natural reinforcements have proved excellent results in terms of properties. Hence, nowadays researches are mainly focused on the use of different natural fibers in different forms as reinforcements in a polymeric composite. This work presents a brief overview of the properties of natural fiber and natural fiber reinforced composites which is an emerging area in polymer science. Interests in natural fiber are reasonable due to the advantages of these materials compared to others, such as synthetic fiber composites, including low environmental impact and low cost and support their potential to be used. Moreover, the disadvantage of the synthetic and fiberglass as reinforcement, the use of natural fiber reinforced composite gained the attention of the young scientists, researchers, and engineers and are being exploited as a replacement for the conventional fiber such as glass, aramid, carbon, etc. Natural fibers have been proven alternative to synthetic fiber in transportation such as automobiles, railway coaches and aerospace, military, building, packaging, consumer products, and construction industries for ceiling paneling, partition boards, etc. However, in the development of these composites, some drawbacks have also emerged. In this paper, it has been tried to overview all of this together.

Keywords
natural fiber, synthetic fiber, polymer composite, composite and bio-degradable

Article Details

How to Cite
Mahir, F. I., Keya, K. N., Sarker, B., Nahiun, K. M., & Khan, R. A. (2019). A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites. Materials Engineering Research, 1(2), 86-97. https://doi.org/10.25082/MER.2019.02.007
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

References

  1. Pat AM, Gonz´alez AV and Franco PJH. Effect of Fiber Surface Treatments on the EssentialWork Offracture of HDPEContinuous Henequen Fiber-Reinforced Composites. Polymer Testing, 2013, 32(6): 1114-1122. https://doi.org/10.1016/j.polymertesting.2013.06.006
  2. Shinoj S, Visvanathan R, Panigrahi S, et al. Oil Palm Fiber (OPF) and its Composites: A Review. Industrial Crops and Products, 2011, 33(1): 7-22. https://doi.org/10.1016/j.indcrop.2010.09.009
  3. Uddin N. Developments in Fiber-Reinforced Polymer (FRP) Composites for Civil Engineering, inWoodhead Pub-lishing Series in Civil and Structural Engineering, Birmingham, Woodhead Publishing, 2013: 558. https://doi.org/10.1533/9780857098955
  4. Chandramohan D and Marimuthu K. A Review on Natural Fibers. International journal of Research and Reviews in Applied Sciences, 2011, 8(2): 194-206.
  5. Malkapuram R, Kumar V and Negi YS. Recent Development in Natural Fiber Reinforced Polypropylene Composites. Journal of Reinforced Plastics and Composites, 2009, 28(10): 1169-1189. https://doi.org/10.1177/0731684407087759
  6. Taj S, Munawar MA and Khan S. Natural Fiber Reinforced Polymer Composites. Proceesings of Pakistan Acaademy of Sciences, 2007, 44(2): 129-144.
  7. Gunti R and Atluri RP. Study on Effect of Chemical Treatments and Concentration of Jute on Tensile Properties of Long and Continuous Twisted Jute/Polypropylene Composite. Advanced Materials Manufacturing and Characterization, 2013, 3: 395-398. https://doi.org/10.11127/ijammc.2013.02.073
  8. Fuqua MA, Huo S and Ulven CA. Natural Fiber Reinforced Composites. Polymer Reviews, 2012, 52(3): 259-320. https://doi.org/10.1080/15583724.2012.705409
  9. Faruk O, Bledzki AK, Fink PH, et al. Biocomposites Reinforced with Natural Fibers. Progress in Polymer Science, 2012, 37(11): 1552-1596.. https://doi.org/10.1016/j.progpolymsci.2012.04.003
  10. Madhu P, Sanjay MR, Senthamaraikannan P, et al. A Review on Synthesis and Characterization of Commercially Available Natural Fibers: Part-I. Journal of Natural Fiber, 2018: 1-13. https://doi.org/10.1080/15440478.2018.1453433
  11. Ferreira JM, Silva H, Costa J, et al. Stress Analysis of Lap Joints Involving Natural Fiber Reinforced Interface Layers. Composites Engineering, 2005, 36(1): 1-7. https://doi.org/10.1016/j.compositesb.2004.04.011
  12. Curvelo A, de Carvalho A and Agnelli J. Thermoplastic Starchcellulosic Fibers Composites: Preliminary Results. Carbohydrate Polymers, 2001, 45(2): 183-188. https://doi.org/10.1016/S0144-8617(00)00314-3
  13. Bledzki A, ZhangWand Chate A. Natural Fiber Reinforced Polyurethane Microfoams. Composites Science and Technology, 2001, 61(16): 2405-2411. https://doi.org/10.1016/S0266-3538(01)00129-4
  14. Jayaraman K and Bhattacharya D. Mechanical Performance of Woodfibrewaste Plastic Composite Materials. Resources Conservation and Recycling, 2004, 41(4): 307-319. https://doi.org/10.1016/j.resconrec.2003.12.001
  15. Zulkifli R, Fatt L, Azhari C, et al. Interlaminar Fracture Properties of Fiber Reinforced Natural rubber/ Polypropylene Composites. Journal of Materials Processing Technology, 2002, 128(1-3): 33-37. https://doi.org/10.1016/S0924-0136(02)00097-3
  16. Mitra B, Basak R and Sarkar M. Studies on Jute-Reinforced Composites, Its Limitations and Some solutions through Chemical Modifications of Fibers. Journal of Applied Polymer Science, 1998, 67(6): 1093-1100. https://doi.org/10.1002/(SICI)1097-4628(19980207)67: 6h1093::AID-APP17i3.0.CO;2-1
  17. Kandola B, Horrocks A, Myler P, et al. Mechanical Performance of Heat/Fire Damaged Novel Flame Retardant Glass- Reinforced Epoxy Composites. Composite Part A: Applied Science and Manufucturing, 2003, 34(9): 863-873. https://doi.org/10.1016/S1359-835X(03)00156-8
  18. Eichhorn S and Young RJ. Composite Micromechanics of Hemp Fibres and Epoxy Resin Microdroplets. Composite Science Technology, 2004, 64(5): 767-772. https://doi.org/10.1016/j.compscitech.2003.08.002
  19. Kaith B, Singha A and Susheel K. Mechanical Properties of Raw Flax and Flax-g-poly(MMA) Reinforced Phenol- Formaldehyde Composites. International Journal of Plastics Technology, 2006, 10: 572-587.
  20. Singha A, Susheel K and Kaith B. Preparation of Flax-g- Copolymer Reinforced Phenol-Formaldehyde Composites and Evaluation of Their Physical and Mechanical Properties. International Journal of Plastics Technology, 2005, 9: 427-437.
  21. Mohammed L, Ansari M, Pua G, et al. A Review on Natural Fiber Reinforced Polymer Composite and Its Applications. International Journal of Polymer Science, 2015: 1-15. https://doi.org/10.1155/2015/243947
  22. Coutinho F and Costa T. Performance of Polypropylene- Wood Fiber Composites. Polymer Testing, 1999, 18(8): 581-587. https://doi.org/10.1016/S0142-9418(98)00056-7
  23. Saheb D and Jog J. Natural Fiber Polymer Composites: A Review. Advanced Polymer Technology, 1999, 18(4): 351-363. https://doi.org/10.1002/(SICI)1098-2329(199924)18: 4h351::AID-ADV6i3.3.CO;2-O
  24. Maleque M, Belal F and Sapuan S. Mechanical Properties Study of Pseudo-Stem Banana Fiber Reinforced Epoxy Composite. The Arabian Journal for Science and Engineering, 2007, 32(2B): 359-364.
  25. Biswas S, Kindo S and Patnaik A. Effect of Fiber Length on Mechanical Behavior of Coir Fiber Reinforced Epoxy Composites. Fibers and Polymers, 2011, 12(1): 73-78. https://doi.org/10.1007/s12221-011-0073-9
  26. Acharya S, Mishra P and Mehar S. Effect of Surface Treatment on the Mechanical Properties of Bagasse Fiber Reinforced Polymer Composite. BioResources, 2011, 6(3): 3155-3165.
  27. Payae Y and Lopattananon A. Adhesion of Pineappleleaf Fiber to Epoxy Matrix: The Role of Surface Treatments. Journal of Science and Technology, 2009, 31(2): 189-194.
  28. Roe P and Ansell M. Jute-Reinforced Polyester Composites. Journal of Material Science, 1985, 20(11): 4015-4020. https://doi.org/10.1007/BF00552393
  29. Devi L, Bhagawan S and Thomas S. Mechanical Properties of Pineapple Leaf Fiber-Reinforced Polyester Properties. Journal of Applied Polymer Science, 1997, 64(9): 1739- 1748. https://doi.org/10.1002/(SICI)1097-4628(19970531)64: 9h1739::AID-APP10i3.3.CO;2-O
  30. Srinivasababu N, Murali M and Suresh K. Tensile Properties Characterization of Okra Woven Fiber Reinforced Polyester Composites. International Journal of Engineering, 2009, 3(4): 403-412.
  31. Rout J, Misra M, Tripathy S, et al. The Influence of Fiber Surface Modification on the Mechanical Properties of Coir-Polyester Composites. Journal of Polymer Composites, 2001, 22(4): 468-476. https://doi.org/10.1002/pc.10552
  32. Cao Y, Shibata S and Fukumoto I. Mechanical Properties of Biodegradable Composites Reinforced with Bagasse Fibre Before and After Alkali Treatments Composites Part A. Applied Science and Manufacturing, 2006, 37(3): 423-429. https://doi.org/10.1016/j.compositesa.2005.05.045
  33. ThielemansW, Can E, Morye S, et al. Novel Applications of Lignin in Composite Materials. Journal of Applied Polymer Science, 2002, 83(2): 323-331. https://doi.org/10.1002/app.2247
  34. Joseph P, Kuruvilla J and Thomas S. Effect of Processing Variables on the Mechanical Properties of Sisal-Fiber Reinforced Polypropylene Composites. Composites Science and Technology, 1999, 59(11): 1625-1640. https://doi.org/10.1016/S0266-3538(99)00024-X
  35. Kalaprasad G, Joseph K and Thomas S. Theoretical Modeling of Tensile Properties of Short Sisal Fiber Reinforced Low-Density Polyethylene Composites. Journal of Material Polymer Science, 1999, 32(16): 4261-4267.
  36. Bing L, Yuhui H and Guangmin C. Influence of Modified Wood Fibers on the Mechanical Properties of Wood Fiber- Reinforced Polyethylene. Journal of Applied Polymer Science, 1997, 66(8): 1561-1568. https://doi.org/10.1002/(SICI)1097-4628(19971121)66: 8h1561::AID-APP17i3.0.CO;2-6
  37. Facca A, Kortschot M and Yan N. Predicting the Elastic Modulus of Natural Fiber Reinforced Thermoplastics Composite part A. Applied Science and Manufacturing, 2006, 37(10): 1660-1671. https://doi.org/10.1016/j.compositesa.2005.10.006
  38. Okubo K, Fujii T and Yamamoto Y. Development of Bamboo-Based Polymer Composites and Their Mechanical Properties. Applied Science and Manufacturing, 2004, 35(3): 377-383. https://doi.org/10.1016/j.compositesa.2003.09.017
  39. Hujuri U, Chattopadhay S, Uppaluri R, et al. Effect of Maleic Anhydride Grafted Polypropylene on the Mechanical and Morphological Properties of Chemically Modified Short-Pineapple-Leaf-Fiber-Reinforced Polypropylene Composites. Journal of Apllied Polymer Science, 2008, 107(3): 1507-1516. https://doi.org/10.1002/app.27156
  40. Chattopadhyay S, Khandal R, Uppaluri R, et al. Mechanical, Thermal, and Morphological Properties of Maleic Anhydride-g -Polypropylene Compatibilized and Chemically Modified Banana-Fiber Reinforced Polypropylene Composites. Journal of Applied Polymer Science, 2010, 117(3): 1731-1740. https://doi.org/10.1002/app.32065
  41. Bledzki A, Mamun A, Jaszkiewicz A, et al. Polypropylene Composites with Enzyme Modified Abaca Fiber. Composites Science Technology, 2010, 70(5): 854-860. https://doi.org/10.1016/j.compscitech.2010.02.003
  42. Chattopadhyay S, Khandal R, Uppaluri R, et al. Bamboo Fiber Reinforced Polypropylene Composites and Their Mechanical, Thermal, and Morphological Properties. Journal of Applied Polymer Science, 2011, 119(3): 1619-1626. https://doi.org/10.1002/app.32826
  43. Rana A, Mandal A, Mitra B, et al. Short Jute Fiber- Reinforced Polypropylene Composites: Effect of Compatibilizer. Journal of Applied Polymer Science, 1998, 69(2): 329-338. https://doi.org/10.1002/(SICI)1097-4628(19980711)69: 2h329::AID-APP14i3.0.CO;2-R
  44. Tajvidi M, Shekaraby M, Motiee N, et al. Effect of Chemical Reagents on the Mechanical Properties of Natural Fiber Polypropylene Composites. Journal of Polymer Composites, 2006, 27(5): 563-569. https://doi.org/10.1002/pc.20227
  45. Jawaid M and Khalil HA. Cellulosic/Synthetic Fibre Reinforced Polymer Hybrid Composites: A Review. Carbohydrate Polymers, 2011, 86(1): 1-18. https://doi.org/10.1016/j.carbpol.2011.04.043
  46. Hajnalka H, Racz I and Anandjiwala RD. Development of HEMP Fibre Reinforced Polypropylene Composites. Jornal of Thermoplastic Composite Materials, 2008, 21(2): 165- 174. https://doi.org/10.1177/0892705707083949
  47. Dixit S, Goel R, Dubey A, et al. Natural Fibre Reinforced Polymer Composite Materials - A Review. Polymers from Renewable Resources, 2017, 8(2): 71-78. https://doi.org/10.1177/204124791700800203
  48. Sen T and Reddy H. Various Industrial Applications of Hemp, Kinaf, Flax and Ramie Natural Fibres. International Journal of Innovation, Management and Technology, 2011, 2(3): 192-198.
  49. Bongarde US and Shinde VD. Review on Natural Fiber Reinforcement Polymer Composite. International Journal of Engineering Science and Innovative Technology, 2014, 3(2): 431-436.
  50. Mwaikambo L. Review of the History, Properties and Application of Plant Fibres. African Journal of Science and Technology, 2006, 7(2): 121.