Open Access Peer-reviewed Research Article

Main Article Content

Jie Tian
Yan Li
Yuming Zhao
Qing Ding
Jinwen Ai
Shouding Li
Qi Cheng corresponding author


In this paper, the effects of heat treatment temperature on the degree of exfoliation of organic clay under different compatibilizers were tested by using organic clay 93A, high density polyethylene (HDPE) and compatibilizer (PE-g-MA), polyethylene maleic anhydride copolymer (PEMA), maleic anhydride and polyethylene blend (MA/PE). The proportion of organic clay is 5 wt%, HDPE is 90 wt% and compatibilizer is 5 wt%. Temperature ranged from 210oC to 250oC, the position of [001] peak in the sample was determined, FESEM, TGA, FTIR and XRD was used to analyze the influence of temperature on the distribution behavior of clay in polymer system. The results are very significant for the industrial production of clay composite materials.

organic clay, nanocomposites, compatibilizer, HDPE, XRD

Article Details

Supporting Agencies
This project was supported by the fund from National Key R&D Program of China(2018YFB0905300,2018YFB0905305)and China Southern Power research fund for fire safety assessments for large scale grid energy storage system (090000KK52190004).
How to Cite
Tian, J., Li, Y., Zhao, Y., Ding, Q., Ai, J., Li, S., & Cheng, Q. (2020). Heat treatment effect on the distribution of organic clay in polymer nanocomposites. Materials Engineering Research, 2(1), 113-117.


  1. Li MG, Zang HJ, Feng JX, et al. Efficient conversion of chitosan into 5-hydroxymethylfurfural via hydrothermal synthesis in ionic liquids aqueous solution. Polymer Degradation and Stability, 2015, 121: 331-339.
  2. Cha J, Jin S, Shim JH, et al. Functionalization of carbon nanotubes for fabrication of CNT/epoxy nanocomposites. Materials & Design, 2016, 95: 1-8.
  3. Vaganov G, Yudin V, Vuorinen J, et al. Influence of multiwalled carbon nanotubes on the processing behavior of epoxy powder compositions and on the mechanical properties of their fiber reinforced composites. Polymer Composites, 2017, 37(8): 2377-2383.
  4. Zhou Y, Pervin F and Rangari V K. Influence of montmorillonite clay on the thermal and mechanical properties of conventional carbon fiber reinforced composites. Journal of Materials Processing Technology, 2017, 191(3): 347-351.
  5. Pathak A, Borah M, Gupta A, et al. Improved mechanical properties of carbon fiber/graphene oxide-epoxy & brid composites. Composites Science & Technology, 2016, 135: 28-38.
  6. Yuan W, Xiao Q, Li L, et al. Thermal conductivity of epoxy adhesive enhanced by hybrid graphene oxide/A1N particles. Applied Thermal Engineering, 2016, 106: 1067-1074.
  7. Wu XP, Liu C, Qi H, et al. Synthesis and adsorption properties of halloysite/carbon nanocomposites and halloysite-derived carbon nanotubes. Applied Clay Science, 2016, 119: 284-293.
  8. Shu Z, Chen Y, Zhou J, et al. Nanoporous-walled silica and alumina nanotubes derived from halloysite: controllable preparation and their dye adsorption applications. Applied Clay Science, 2015, 112-113: 17-24.
  9. Zhou Q, Gao Q, Luo WJ, et al. One-step synthesis of amino-functionalized attapulgite clay nanoparticles adsorbent by hydrothermal carbonization of chitosan for removal of methylene blue from wastewater. Colloids and Surfaces A, 2015, 470: 248-257.
  10. Wu XP, Gao P, Zhang XL, et al. Synthesis of clay/carbon adsorbent through hydrothermal carbonization of cellulose on palygorskite. Applied Clay Science, 2014, 95: 60-66.
  11. Nigay P, Sani R and Cutard T. Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives. Materials Science and Engineering: A, 2017, 708: 375-382.
  12. Wu XP, Xu YQ, Zhang XL, et al. Adsorption of low-concentration methylene blue onto a palygorskite/carbon composite. New Carbon Materials, 2015, 30(1): 71-78.
  13. Yuan X, Zhu B, Cai X, et al. Optimization of interfacial properties of carbon fiber/epoxy composites via a modified polyacrylate emulsion sizing. Applied Surface Science, 2017, 401: 414-423.
  14. Lee S, Choi S, Kwon SH, et al. Modification of surface functionality of multi-walled carbon nanotubes on fracture toughness of basalt fiber-reinforced composites. Composites Part B: Engineering, 2015, 79: 47-52.
  15. Laginhas C, Nabais J and Titirici M. Activated carbons with high nitrogen content by a combination of hydrothermal carbonization with activation. Microporous and Mesoporous Materials, 2016, 226: 125-132.
  16. Sung D, Kim M and Park Y. Prediction of thermal conductivities of carbon-containing fiber-reinforced and multiscale hybrid composites. Composites Part B: Engineering, 2018, 133: 232-239.